Steward for estate managers

Run the household staff, the machines, the vendors and the spending in one place, and keep the owner informed without a phone call.

Sign in

What do I see when I sign in?

A menu down the side, in groups:

  • Today: what needs you now.
  • Work: Maintenance, Tasks and Calendar.
  • The house: Assets (the machines), Spaces (the rooms and buildings) and Documents.
  • Money: Spending.
  • Contacts: People and Vendors.
  • Admin: Handover pack, House settings and Activity.

“Ask about the house” is at the top. On a phone, Today, Maintenance, Tasks and Assets are at the bottom of the screen, and everything else is under More.

If you run more than one house, the house's name at the top of the menu is where you change house, and “All houses” shows every house side by side: what is overdue, what is waiting for the owner, who is in and what each one has spent this month. A second house is set up for you by Steward; ask us.

How do I record a repair?

  1. Step 1: Open Maintenance and tap “Report a request”. Say what is wrong and which machine or room it is.
  2. Step 2: Give it to a member of staff or a vendor, and set the day it will be done.
  3. Step 3: When it is done, tap “Record completion”. For a generator, type the hour meter reading.
  4. Step 4: Check the work. If it was not done properly, send it back.

What happens when a repair costs more than the owner’s limit?

Write down what it cost. If the cost is above the owner’s limit, it goes to the owner for a yes or no, and the job cannot be closed until they say yes. If the price changes, the owner is asked again.

If the owner gave you their answer by phone, on WhatsApp or in person, write that down on the job. You can see the limit in House settings, but only the owner can change it.

How do I buy something for the house?

Open Maintenance and tap “Ask to buy something”. When it is bought, mark it as bought and say who handed over the money. Staff can also ask to buy something from their phone; you decide.

How do I set up work that happens every week?

Open Tasks and set up the routine work, such as cleaning the water tank or testing the alarm. Steward puts each one on the right person’s list on the right day.

When a job is marked done, it waits until somebody other than the person who did it has checked it. You can send it back.

How do I record spending and cash given to staff?

  • Open Spending and tap “Add spending” for a bill or a purchase. For fuel and gas, write how many litres or kilos; Steward then compares the price with the published average.
  • Tap “Give cash” when you hand money to a member of staff, and “Settle” when they bring back the change and receipts.
  • If a member of staff paid from their own money, mark it, and mark it again when they are paid back.

“What stands out” at the top points out anything worth a look. The owner sees the same.

How do I pay a vendor from the wallet?

The wallet is the house's own account number. The owner puts money in; you pay vendors out of it, straight to their bank account.

  1. Step 1: On the vendor's page, tap “Add bank account” and type their bank and account number. Steward asks the bank whose account it is and shows the name before you can tap “Save”.
  2. Step 2: Open Wallet under Money and tap “Pay a vendor”. Choose the vendor, or choose “Someone else” and type who, their bank and account number. Type the amount and what it was for.
  3. Step 3: The transfer charge, and what will leave the wallet, are shown before you tap “Pay”.

Under the house limit the money goes at once. Over it, the button says “Ask the owner” and the payment waits: nothing leaves the wallet until the owner says yes, and you can tap “Withdraw” to take it back. The payment becomes spending by itself, so there is nothing to type up. If the bank sends it back, the money returns to the wallet and you are told.

How do I give a vendor a receipt for a payment?

Once the money has arrived in the vendor's account, the payment has a receipt. It shows the house's name, the amount, what it was for, and a reference their bank can look up. It never shows the transfer charge or what is left in the wallet.

  1. Step 1: Open Wallet under Money and tap the payment. To find an older one, type the vendor or what it was for in the box above the list, or tap “Show older”.
  2. Step 2: Tap “Receipt”.
  3. Step 3: Tap “Share” to send it on WhatsApp or another app, “Download PDF” to save it, “Print” to print it, or “Email it” to send it to the vendor's email address.

“Share” shows on phones that can send a file to another app. The vendor's email address is filled in when it is on their page.

How do I add a member of staff?

  1. Step 1: Open People and tap “Add a person”.
  2. Step 2: To let them sign in, tap “Give access”. Steward emails them an invitation.
  3. Step 3: If the email does not arrive, Steward shows you the link once. Send it to them on WhatsApp or by text.

On their page you can also mark the days they do not work, and time away. A person does not need a sign-in to be on the list.

How do I put labels on the machines?

Open Assets or Spaces and tap “Print labels”. Stick each label on its machine or room door. Staff scan it with their phone to open that machine’s page and its jobs.

What is the handover pack?

Everything a new manager needs to run the house: every room, machine, servicing date, vendor and paper. Open Handover pack and tap “Print”. If you ever leave, the next manager starts with it.

How do I stop a member of staff’s access when they leave?

Open People, find the person and tap “Offboard”. Their sign-in stops at once, their open work goes to whoever you name, and you can write down anything only they knew.

How do I ask a question about the house?

  1. Step 1: Tap “Ask about the house” at the top of the screen.
  2. Step 2: Type your question in your own words, for example “When was the generator last serviced?”
  3. Step 3: Read the answer. It shows where in the house’s records it was found.

If something was never written down, it tells you so instead of guessing. It only answers from what you are allowed to see.

Why do I need a code as well as a password?

So nobody can get in with your password alone. The first time you sign in, Steward helps you set up a code app on your phone, such as Google Authenticator. It gives you a new six-digit code each time you sign in.

Steward also gives you ten recovery codes. Write them down and keep them somewhere safe. If you lose your phone, tap “I do not have my phone” and type one of them.

For owners and estate managers the code is required and cannot be turned off.

Still need help?

Message us on WhatsApp and we will help you.

Message us on WhatsApp